Inhaltsverzeichnis
Werbung
Annual inspections of the limiting devices
Component
Buffers
Slipping clutch
Annual inspections of the electrical components
Component
Main isolation switch
Wiring
Contactors
Fuses
Annual inspections of the motors and brakes
Component
Motors
Brakes
Annual inspections of the mechanical components
Component
Chain sprocket
Chain guide
Chain bucket
Bearings
Load carrying structure
Annual inspections of the control devices
Component
Pendant controller
The product may have options which also require inspection. Make sure that all
HINWEIS
components are inspected.
Dieses Dokument und die darin enthaltenen Informationen sind das alleinige Eigentum von Verlinde S.A.S. und stellen
ein Geschäftsgeheimnis dar, d.h. das Dokument und die Informationen sind vertraulich, gesetzlich geschützt und nicht
für die Öffentlichkeit bestimmt. Ohne ausdrückliche schriftliche Genehmigung von Verlinde S.A.S. darf der Inhalt dieses
Dokuments weder verändert, vervielfältigt, an Dritte weitergegeben oder anderweitig verwendet werden. Copyright
2020 © Verlinde S.A.S. Alle Rechte vorbehalten.
Objective
Check the condition of the buffers and the end stops of the buffers.
Check the operation of the slipping clutch. Use the ChainQ tool or see the
instructions in chapter Adjusting the slipping clutch.
Objective
Check the condition and operation of the main isolation switch.
Check the condition of the wiring and the connections.
Check the condition and operation of the contactors.
Check the condition of the fuses. For instructions, see chapter Replacing
the control voltage fuse.
Objective
Check the operation of the motors.
Check the operation and wearing of
the brake.
Objective
Check the condition of the chain sprocket. With two-fall hoists, also check
the return sprocket.
Check the condition of the chain guide.
Check the fixing and the condition of the chain bucket.
Check the greasing of the return sprocket bearing.
Check the condition of the bolted joints and load carrying structures.
Check the condition and mounting of the securing components.
Objective
Check the condition and functionality of push buttons and switches.
BENUTZERHANDBUCH
Reference
For instructions on how to check the
brake wear, see chapter Checking
the brake lining.
4/2020
Werbung
Inhaltsverzeichnis
