Werbung
Verfügbare Sprachen
Verfügbare Sprachen
• Always unplug the power cord from the wall outlet when large spills occur near the circuit boards, cables, and motors.
Remove the occupant from the product, clean up the fluid, and inspect the product. Fluids can cause unpredictable
operation and decreased functionality of any electrical product. Do not return the product to service until it is completely
dry and you have tested for safe operation.
• Always wipe with clean water (or 70% isopropyl alcohol, if using V V i i r r e e x x ® TB) and dry each product after disinfecting.
Some disinfectants are corrosive in nature and may cause damage to the product. If you do not rinse and dry the
product, you may leave a corrosive residue on the surface of the product. This corrosive residue could cause premature
degradation of critical components. Failure to follow these disinfecting instructions may void your warranty.
• The use of accessories, transducers, and cables, other than those specified or provided by the manufacturer, could
result in increased electromagnetic emissions or decreased electromagnetic immunity and result in improper operation.
• The emissions characteristics of this equipment make it suitable for use in industrial areas and hospitals (CISPR 11
class A). If it is used in a residential environment (for which CISPR 11 class B is normally required) this equipment might
not offer adequate protection to radio-frequency communication services. The user might need to take mitigation
measures, such as relocating or re-orienting the equipment.
• Portable RF communications equipment, including peripherals such as antenna cables and external antennas, should
be no closer than 12 inches (30 cm) to any part of T T r r u u R R i i z z e e , including cables specified by the manufacturer.
• Avoid stacking or placing equipment adjacent with other equipment to prevent improper operation of the products. If
such use is necessary, carefully observe stacked or adjacent equipment to make sure that they are operating properly.
EN
4
3333-009-005 Rev C.0
Werbung
