Error Codes And Flashing Sequences - HomeMatic HmIP-SCTH230 Installations- Und Bedienungsanleitungen

If the duty cycle is exceeded, this is indicated by one long
red lighting of the device LED (E), and may manifest itself
in the device temporarily working incorrectly. The device
starts working correctly again after a short period (max.
1 hour).
7.3

Error codes and flashing sequences

Flashing code
Short orange
flashing
1x long green
lighting
1x long red
lighting
Short orange
flashing (every
10 s)
6x long red
flashing
1x orange
and 1x green
lighting
Meaning
Radio
transmission/
attempting to
transmit/
data transfer
Transmission
confirmed
Transmission
failed or duty
cycle limit is
reached
Teach-in
mode active
Device
defective
Test display
Troubleshooting
Solution
Wait until the transmis-
sion is completed.
You can continue
operation.
Please try again (see
sec. "7.1 Command not
confirmed" on page
48 or "7.2 Duty cycle"
on page 48).
Enter the last four
numbers of the
device serial number
to confirm (see "5.3
Teaching-in" on page
44).
Have a look at your app
for error message or
contact your retailer.
Once the test display
has stopped, you can
continue.
49