Technical Characteristics; Filters; Cooling Coil - Carrier 50CJ Serie Installations-, Betriebs- Und Wartungsanleitung

7 - TECHNICAL CHARACTERISTICS

7.1 - Filters

EN 779-2012 efficiency: M5
ISO16890 efficiency: ePM10 50%
Thickness: 48 mm.
Efficiency: 90% gravimetric
Filter area: 2 x the face area
Fire rating: M1.
Unit W
X unit
Dimensions
Number
■ Pressure drops - clean filters
Unit W
X unit
Nominal flow rate (m³/h)
∆P (Pa) M5/ePM10 50%
∆P (Pa) F7/ePM1-60%
∆P (Pa) M5+F7(ePM10 50%+ePM1 60%)
Filter fouling is measured by a pressure sensor located in the electrics box.
It is set to 1.5 times the pressure drop value for the filter when clean (pressure tapping upstream and downstream of the filter).

7.2 - Cooling coil:

Note: make sure that the chilled water supply pipes are insulated.
Moderately tighten the coil supply connections to avoid damaging the manifolds.
■ Coil specifications
Unit W
Coil
specifications
Valve
specifications
(1) Return air conditions 24°C RH 50%, water temperature 7/12 °C
NOTE: R efer to your temperature range selection sheet for the technical information (capacity, water flow, water flow rates, pressure drops, etc.).
EN 779-2012 efficiency: F7
ISO16890 efficiency: ePM1 60%
Thickness: 48 mm
Efficiency: 85% opacimetric
Filter area: 1 7 x face area with a thickness of 48 mm
Fire rating: M1
W5 W8
X5 X8
508 x 465 604 x 465
1 1
W5 W8
X5 X8
1 300 2 000
33 49
35 53
- -
Rated water flow rate m³/h
(1)
Capacity (I)
KV valve
∆Pmax (Pa) 2-way valve
∆Pmax (Pa) 3-way valve
W12 W16 W27
X10 X 12/15 X 19/24
700 x 465 945 x 565 945 x 400
1 1
W12 W16 W27
X10 X 12/15 X 19/24
2 500 4 000 6 000
55 53 58
59 57 63
- 110 121
W5 W8
1,1 1,4
2,2 2,74
1,6 2,5
1200 400
250 100
X 31/36 X 38/48
945 x 565 945 x 500
2 2 4
X 31/36 X 38/48
8 000 12 000
53 58
57 63
110 121
W12 W16 W27
1,67 2,57 3,7
3,87 9,2 13,1
4 4 10
400 600 600
240 600 600
51