Alarm History; Clock Functions - Ingersoll-Rand Nirvana Serie Bedienungsanleitung

12207.13.10

9.9 ALARM HISTORY

Alarm History displays each of the Alarm messages for
the last 15 Alarms experienced by the machine. It also
gives access to displaying the machine operating
conditions that existed at the time of each Alarm. The
first one shown, "Alarm History 1", was the most recent
Alarm to occur. Note that multiple, consecutive
EMERGENCY STOP Alarms are not recorded as
separate Alarms, only the first one will be shown.
100 100
READY TO START
STATUS
9.10

CLOCK FUNCTIONS

100 100
READY TO START
STATUS
9.0 OPERATING INSTRUCTIONS
−ALARM HISTORY−
PSI PSI
ALARM HISTORY 1
BLOWER MOTOR
OVERLOAD
ALARM HISTORY 2
HIGH AIREND DISCH
TEMP
MAIN MENU SELECT
CLOCK FUNCTIONS−
−
Time
PSI
01:15
Date Date
Jan 01, 00 Jan 01, 00
MAIN MENU SELECT
IRN37−160K−CC & IRN50−200H−CC & IRN75−160K−2S & IRN100−200H−2S & IRN250−300H−2S
Each of the last 15 Alarm messages can be seen by
moving the Alarm History list up and down using the
arrow buttons. Pressing the SELECT button when one
of the Alarms is highlighted will display the list of
machine values that existed at the time that particular
Alarm occurred.
The name and value of each of the items can be seen
by moving the list up and down using the arrow buttons.
Pressing the ALARM HIST. button will return the display
to the ALARM HISTORY screen.
Alarm histories can be exited by pressing either the
STATUS or MAIN MENU buttons. If no buttons are
pressed within 30 seconds, the display will return to the
CURRENT STATUS screen.
The date and time for the real time clock is set through
the CLOCK FUNCTIONS screen. Use the up and down
arrows to highlight either TIME or DATE. Select the
highlighted setting by pressing SELECT.
If TIME is selected, first the hours will be highlighted.
Adjust the hours (00−23 hour clock) by using the up and
down arrows. Once the correct time is in the display,
press SET to highlight the minutes. Adjust the minutes
(00−59) and then press SET to complete setting the
time.
If DATE is selected, first the month will be highlighted.
Adjust the month by using the up and down arrows and
then press SET to highlight the date. Once the correct
date is displayed, press SET to highlight the year. Once
the correct year is displayed, press SET to complete
setting the date.
http://air.irco.com
69