Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
8.2
Settings for the mobile unit and the base station
8.2.1
Switching the button click on or off
Each time a button on the mobile unit is pressed, this is confirmed with a short signal tone
(button click). This short signal tone can be switched on or off.
1.
Press the menu button
2.
Select the SETTINGS menu with
3.
Confirm the KEY TONE function with
4.
Switch the button click on or off with
5.
Now select further menu functions or exit the menu by pressing and holding the
button.
8.2.2
Turning the display lighting on or off.
The display is equipped with background lighting, which illuminates the display while the unit
is in use. This background lighting can be switched on or off.
1.
Press the menu button
2.
Select the SETTINGS menu with
3.
Select the BACKLIT function with
4.
Switch the background lighting on or off with
5.
Now select further menu functions or exit the menu by pressing and holding the
button.
8.2.3
Setting the FLASH time
As you have already seen in Chapter 7, you can set two FLASH times with 100ms or 300ms.
1.
Press the menu button
2.
Select the SETTINGS menu with
3.
Select the RECALL function with
4.
Select the flash time RECALL 1 (100ms) or RECALL 2 (300ms) with
and confirm with
5.
Exit the entry mode by holding the
Downloaded from
www.Manualslib.com
- Special functions -
.
.
.
.
manuals search engine
and
and confirm with
.
and
and confirm with
and
and confirm with
and
and confirm with
and
and confirm with
and
and confirm with
and
and confirm with
button pressed.
.
.
.
.
.
.
.
and
51
Werbung
Kapitel
Inhaltsverzeichnis
Fehlerbehebung
