Herunterladen Inhalt Inhalt Diese Seite drucken

Star LC-100+ COLOUR Bedienungshandbuch Seite 148

Punkt-matrix-drucker
Inhaltsverzeichnis

Werbung

Problem
Possible Cause
Left margin moves to the
The paper is not loaded cor-
right during printing.
rectly, causing the print
head to jam.
The ribbon cassette is not
installed correctly, causing
the print head to jam.
The printer is not set up cor-
rectly for the thickness of
paper being used.
Inappropriate settings are
selected by your application
program.
Static electricity caused by
interference from nearby
electrical devices or by low-
level humidity is affecting
printer operation.
137
Recommended Action
Remove all paper from the
La marge gauche avance
printer and reload it. Try
vers la droite au cours de
printing again.
l'impression.
Make sure that the ribbon
cassette is installed cor-
rectly. See "Installing the rib-
bon cassette" on page 7.
Set up the printer for the
paper thickness you are
using. See "Adjusting for
paper thickness" on page
113.
Choose different settings in
your application.
Make sure that the printer is
not too close to any devices
with electric motors or that
raise the humidity level.
Problème
Cause possible
Le papier n'est pas chargé
correctement, ce qui bloque
la tête d'impression.
La cartouche de ruban n'est
pas installée correctement,
ce qui bloque la tête d'im-
pression.
L'imprimante n'est pas
réglée sur l'épaisseur du
papier utilisé.
Les réglages ne sont pas
corrects sur le programme
d'application.
De l'électricité statique pro-
voquée par des inter-
férences avec un autre
appareil électrique ou par la
sécheresse de l'air affecte
le fonctionnement de
l'imprimante.
Action recommandée
Enlevez tout le papier de
l'imprimante, puis remettez-
le et essayez de nouveau
d'imprimer.
Vérifiez que la cartouche de
ruban est correctement
installée. Voir "Mise en
place de la cartouche de
ruban" à la page 8.
Réglez l'imprimante en
fonction de l'épaisseur du
papier utilisé. Voir "Réglage
de l'épaisseur du papier" à
la page 113.
Choisissez un autre
réglage sur le programme
d'application.
Vérifiez que l'imprimante
ne se trouve pas trop près
d'un appareil avec un
moteur électrique, ou aug-
mentez le niveau d'humid-
ité.

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis