Herunterladen Inhalt Inhalt Diese Seite drucken

Star LC-100+ COLOUR Bedienungshandbuch Seite 146

Punkt-matrix-drucker
Inhaltsverzeichnis

Werbung

Problem
Possible Cause
Printer makes exces-
The front cover is removed.
sive noise.
The printer is vibrating.
Printer prints past the
Incorrect margin settings are
edge of the paper.
selected by your application
program.
The paper guide is not posi-
tioned correctly.
The ribbon is jammed, caus-
ing the print head to jam.
Paper is jamming, causing the
print head to jam.
135
Recommended Action
Replace the front cover.
Move any objects that are
touching the printer.
Make sure that the printer is on
a level steady surface.
Choose different margin set-
tings from your application pro-
gram.
Remove the paper and adjust
the position of the paper guide.
Reload the paper and try print-
ing again.
Make sure that the ribbon cas-
sette is installed correctly. See
"Installing the ribbon cassette"
on page 7.
Remove all paper from the
printer and reload it. Try printing
again.
Set up the printer for the paper
thickness you are using. See
See "Adjusting for paper
thickness" on page 113.
Problème
Cause possible
L'imprimante produit
Le capot avant est enlevé.
beaucoup de bruit.
L'imprimante vibre.
L'imprimante imprime
La marge n'est pas correcte-
au-delà de la bordure
ment réglée sur le programme
du papier.
d'application.
Le guide-papier n'est pas posi-
tionné correctement.
Le ruban est coincé, ce qui
bloque la tête d'impression.
Le papier est coincé, ce qui
bloque la tête d'impression.
Action recommandée
Remettez le capot avant.
Enlevez tous les objets qui
touchent l'imprimante.
Vérifiez que l'imprimante est
sur une surface plane.
Changez le réglage de la marge
sur le programme d'application.
Enlevez le papier et réglez la
position du guide-papier.
Remettez le papier et essayez
de nouveau d'imprimer.
Vérifiez que la cartouche de
ruban est correctement
installée. Voir "Mise en place de
la cartouche de ruban" à la
page 8.
Enlevez tout le papier de l'impri-
mante, puis remettez-le et
essayez de nouveau d'im-
primer.
Réglez l'imprimante en fonction
de l'épaisseur du papier utilisé.
Voir "Réglage de l'épaisseur du
papier" à la page 114.

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis