Fault Finding The Product; Technical Data; Temperature; Enclosure Class - Grundfos iGRID Montage- Und Betriebsanleitung

7. Fault finding the product

WARNING
Electric shock
Death or serious personal injury
- Ensure that the electronics box has
been switched off when you perform
fault finding on the product.
Fault
1. The building bypass and
building measure point are
not present in the device
overview on the website.
2. No data is coming from
the product.

8. Technical data

8.1 Temperature

• Ambient temperature: 0 to 60 °C
• Liquid temperature: 0 to 105 °C.

8.2 Enclosure class

• The electronics box: IP55.

8.3 Weight

• The building bypass weighs 2.8 kg
• The building measure point weighs 2.1 kg.

8.4 Dimensions of electronics box

• Width: 263 mm
• Height: 199 mm
• Depth: 95 mm.

9. Disposal

This product or parts of it must be disposed of in an
environmentally sound way:
1. Use the public or private waste collection service.
2. If this is not possible, contact the nearest
Grundfos company or service workshop.
The crossed-out wheelie bin symbol on
a product means that it must be
disposed of separately from household
waste. When a product marked with this
symbol reaches its end of life, take it to a
collection point designated by the local
waste disposal authorities. The separate collection
and recycling of such products will help protect the
environment and human health.
Cause
a) User rights have not been
granted.
a) The modem is missing a SIM
card.
b) There is a PIN code on the SIM
card.
c) The antenna conditions are not
optimal.
d) Other faults.
WARNING
Hot surface
Death or serious personal injury
- Before starting any work on the product,
ensure that the district heating pipe has
been closed, cooled down and
depressurised.
Remedy
Contact Grundfos.
Insert a SIM card without a PIN code.
Contact your service provider.
Improve the antenna conditions.
Contact Grundfos.
9