Monacor ATS-80ST Bedienungsanleitung Seite 18

the list of available devices. Pair the smartphone
with ATS-80ST (see instructions of the smart-
phone). When the Bluetooth connection has been
established, the button BT on the transmitter will
stop flashing and will stay illuminated.
3) Start the replay on the smartphone. The replay
can be reproduced via headphones connected
to the jack
4) In order to listen to the replay via the receivers,
press the button FEED THRU (9) on the transmitter
so that the button is illuminated.
5) Only turn up the control AUX LEV (10) to a point
where the audio signals reproduced via the receiv-
ers are not distorted. Turn up or turn down the
volume on the smartphone as required.
6) If the Bluetooth function is not used any more,
briefly press the button BT to deactivate the func-
tion. The button is no longer illuminated.
Note: To use the Bluetooth function again, repeat
steps 1 – 3. Automatic pairing with a device that has
been paired with the transmitter before will only be
possible when the Bluetooth function of ATS-80ST has
not been deactivated.
18
(3).