Auriol AFT 77 B2 Bedienungsanleitung Seite 16

If synchronisation with the DCF signal is still not possible, you can
manually enable/disable the automatic DCF reception function.
♦ Press and hold the
reception symbol ( ) is shown on the time panel 6.
The automatic DCF reception function is switched off.
♦ Press and hold the
The automatic DCF reception function is switched backed on
and can be restarted.
The DCF signal
The DCF signal (time signal transmitter) consists of time impulses
which are transmitted by the most accurate clock in the world –
near Frankfurt am Main, Germany.
Under ideal conditions, the radio temperature station can receive
the signals up to a distance of around 2000 km from Frankfurt am
Main. Reception of these DCF signals normally takes between 3 and
5 minutes. If reception of the DCF signal fails, the temperature station
will stop trying to establish reception after around 7 minutes.
Reception can be considerably restricted by obstacles (e.g.
concrete walls) or interference sources (e.g. other electronic
appliances). If necessary, you should change the location of the
temperature station (e.g. put it by a window) if reception problems
continue.
AFT 77 B2
. The upper part of the
button
again.
button
GB │ CY │
13 ■