Safety Instructions - Konig + Neurath TALO.YOU Bedienungsanleitung

SAFETY INSTRUCTIONS

Failure to follow the instruction marked with a warning
symbol can lead to accidents with serious personal injury.
please read the following safety instructions carefully. It is
crucial that any person installing or using the system has
the necessary information and has access to the user
instructions.
Before starting:
Make sure the table has been properly assembled. The
table may only be connected to the mains voltage which
is indicated on the control box.
During operation:
If the control box makes any unusual noises or emits
odours, pull the mains plug immediately. Make sure the
cables habe not been damaged. If the power cord is
damaged, it must be replaced by the manufacturer or its
customer service or a similarly qualified person in order
to avouid a hazard.
Before uninstalling or troubleshooting:
Stop the electrically-operated table!
Switch off the power supply and pull the mains plug!
Remove any load from the table!
42