F 5 Delete Container And Shelf Stop - Konig + Neurath TALO.YOU Bedienungsanleitung

F 5 DELETE CONTAINER AND SHELF STOP

To delete a container or shelf stop, proceed as follows:
LOGO
Press the
If necessary, use the
5. F 5 must appear in the display. 5. F 5 must appear in the display. 5. F 5 must appear in the display. 5. F 5 must appear in the display.
A display appears with one bar at the top and one at the bottom.
UP
Press the -button to delete the shelf stop (upper stop).
or
DOWN
Press the
Confirm by pressing the
Only trained personnel should carry out setting
and deletion of container and shelf stops. There is
a danger of injury from wrong setting or removal of
the Stop positions, and a danger of the table
getting destroyed.
-button below the display.
UP DOWN
- and
-button to delete the container stop (lower stop).
LOGO
-button again or wait 10 seconds.
-button to navigate to menu item
61