Switching The Appliance On And Off; Filtering Oil - Angelo Po 0N1FR1E Bedienhandbuch

Lighting
Important
Before use, perform a cooking cycle without
food at a temperature between 150- 160°C.
Operate the appliance's master switch to
1)
connect it to the electrical mains.
Turn the knob clockwise (pos.
2) (A)
temperature required to turn on the heating
elements.
– The mains light (C) comes on.
– The temperature light (D) comes on.
The temperature light (D) comes on to indicate
that the oil is not at the working temperature.
The light goes out when the temperature is
reached.
Turning off
Turn the knob (A) anti-clockwise (pos. 2) to
1)
turn off the heating elements. The mains light
(C) goes off .
Turn off the appliance's circuit breaker to
2)
disconnect it from the electrical mains.
Important
Before proceeding, allow the appliance to cool
for 10-15 min., so that the oil reaches a tempe-
rature between 50 ÷ 120°C.
Open the hatch (A).
1)
Fit the extension (B) onto the tap (C).
2)
Place the container (D) and the fi lter (E),
3)
both available as optionals, underneath the
extension (B).
Turn on the tap (C) to empty the well.
4)
Turn off the tap (C) completion of the operation.
5)
Close the hatch (A).
6)
Caution - Warning
Do not dump oil in the environment; dispose
of it in accordance with the laws in force in the
country of use.
3269930_ut_GB_rev.1

SWITCHING THE APPLIANCE ON AND OFF

) to the
1

FILTERING OIL

A
A
A
B
- 9 -
A
A
D C
1
2
C
E
C
GB
D
ENGLISH