Print Settings; Label Layout - Carl Valentin Vario III Serie Kurzanleitung Und Hinweise Zur Produktsicherheit

Vario III

Print settings

Keys: ,
Speed Indication of print speed in mm/s.
Value range: 50 mm/s to 200 mm/s (see the technical data).
Contrast Indication of value to set the print intensity when using different materials, print speeds or
printing contents.
Value range: 10% to 200 %.
Key:
Transfer ribbon control Off: The ribbon control is deselected, i.e. the printer continues without an error message.
On: The ribbon control is selected, i.e. the current print order is interrupted and an Error
Message appears at the printer display.
strong sensibility: The printer reacts immediately to the end of the transfer ribbon.
weak sensibility: The printer reacts at approx. 1/3 more slowly to the end of the transfer
ribbon.
Key:
Y displacement
Indication of initial point displacement in mm.
Value range: −30.0 to +90.0.
Key:
X displacement
Displacement of the complete print transverse to the paper direction.
Value range: −90.0 to +90.0.
Key:
Tear off Indication of value to which the last label of a print order is moved forward and is moved back to
the beginning of label at a new print start.
Value range: 0 bis 50.0 mm
Standard: 12 mm.

Label layout

Keys: , ,
Label length Indication of label length in mm.
Minimum height: 5 mm.
Gap length Indication of distance between two labels in mm.
Minimum value: 1 mm.
Key:
Column printing Indication of width of one label as well as how many labels are placed side by side.
Key:
Measure label
Press key
Key:
Label type
Generally adhesive labels are set. Press key
Key:
Material selection Selection of the used label and transfer ribbon material.
Key:
Photocell Selection of the used photocell.
The selection of one of the following photocell types is possible: transmission photocell normal
and inverse, reflexion photocell normal and inverse.
94
All manuals and user guides at all-guides.com
to start measuring.
English
to select continuous labels.