Date & Time - Carl Valentin Vario III Serie Kurzanleitung Und Hinweise Zur Produktsicherheit

Vario III
Key:
Printhead resolution
At activated ZPL II
Key:
Drive mapping The access to Zebra
Date & Time
Keys: , , ,
Set date and time The upper line of display shows the current date, the second line the current time.
With keys
can increase and/or decrease the displayed values.
Key:
Summertime On: Printer automatically adjust clock for daylight saving changes.
Off: Summertime is not automatically recognized and adjusted.
Key:
Start of summertime Select the format in which you want to define beginning summertime.
(format) DD = day
WW = week
WD = weekday
MM = month,
Y = year
next day = only next day is taken into consideration
Key:
Start of summertime (date) By means of this function you can enter the date at which summertime has to start. This entry
refers to the previously selected format.
Key:
Start of summertime (time) By means of this function you can define the time when you want to start summertime.
Key:
End of summertime Select the format in which you want to define end of summertime.
(format)
Key:
End of summertime (date) By means of this function you can define the date when you want to stop summertime. The
entry refers to the previously selected format.
Key:
End of summertime (time) By means of this function you can define the time when you want to stop summertime.
Key:
Time shifting By means of this function you can enter time shifting in hours and minutes (for automatically
adjustment from summer and wintertime). This entry refers to the currently set printer time.
98
All manuals and user guides at all-guides.com
®
emulation the printhead resolution of the emulated printer must be set.
®
drives is rerouted to the corresponding Valentin drives.
, , , , ,
and you can change to the next or previous field. With keys
English
and you