Network; Remote Console; Interface; Emulation - Carl Valentin Vario III Serie Kurzanleitung Und Hinweise Zur Produktsicherheit

Network

Keys: , , ,
For more information, please see the separate manual.

Remote console

Keys: , , ,
For more information please contact our sales department.

Interface

Keys: , , ,
COM1 / Baud / P / D / s COM1:
0 - serial interface Off
1 - serial interface On
2 - serial Interface On; no error message occurs in case of a transmission error.
Baud rate:
Indication of bits which are transferred per second.
Following values are possible: 1200, 2400, 4800, 9600, 19200, 38400, 57600 and 115200.
P = Parity:
N - No parity
E - Even
O - Odd
Please observe that the settings correspond to those of the printer.
D = Data bits
Setting of data bits.
Value range: 7 or 8 Bits.
S = Stop bits
Indication of stop bits between bytes.
Value range: 1 or 2 stop bits.
Key:
Start sign / End sign SOH: Start of data transfer block
ETB: End of data transfer block
Key:
Data memory Standard: After starting a print order the printer buffer receives data as long as it is filled.
Advanced: During a current print order data is received and processed.
Off: After starting a print order no more data is received.
Key:
Port test
Check whether the data are transferred via the interface.
Press the
any port (COM1, LPT, USB, TCP/IP) is printed.

Emulation

Keys: , , ,
Protocol CVPL: Carl Valentin Programming Language
ZPL: Zebra
Press keys
printer is restarted and ZPL II
All manuals and user guides at all-guides.com
,
, ,
, , ,
and keys to select standard (on). Press the
, , , ,
®
Programming Language
and to select the protocol. Press key
®
commands are transformed internally into CVPL commands.
English
Hex format 01
Hex formal 17
key and the data sent via
to confirm the selection. The
Vario III
97