MARIMEX TrampolIna Serie Montageanleitung Seite 61

Step 17
The picture below shows, what the
trampoline should look like after the
rods have been installed.
Step 19
Thread the clamping rope
alternately through the loops
on the jumping mat and the
holes in the protective net. Then
check all the connections,
tighten and secure the knots
at the ends of the clamping
rope to prevent the release of
the protective net.
Step 20
Your trampoline is complete.
Secure the structure against
the effects of the weather
and unwanted displacement
with an anchoring set
(not included).
Step 18
With the help of another person, pull
the safety net up and gradually insert
the ring into the ring holders.
EN
61