b-intense b-control deluxe Bedienungsanleitung Seite 64

EN
Annex
Assembly b-control units
Warning
Visually check the b-intense
b-intense from the power supply and contact us via office@b-intense.at.
®
Before working on the controller, the power supply must be switched off on all poles (pull the
main plug) and prevented it from being switched on.
The use of components not licensed by b-intense
or reduce the electromagnetic immunity of the device and lead to improper operation and is
therefore prohibited.
During regular operation the heaters can reach high surface temperatures, which can cause burns
when touched.
Only original b-intense components (IR heaters, fan, sensor, etc.) must be connected to the control
®
system. Spare parts have to be ordered from b-intense
Visually check the cabins installation before the first use (there should be no brittle wood, no broken
glass, no nails or screws sticking out, the cabin should stand stable and not loose).
infrared cabin regularly. In case of visible damage unplug the
®
can cause higher electromagnetical emissions
®
.
®
64