b-intense b-control deluxe Bedienungsanleitung Seite 54

EN
The special program PREHEATING
Applications in your b-intense
Therefore we recommend our customers to heat the cabin up to this temperature before starting a b-intense
only available in b-intense
The preheating time is very short and can be utilised to get ready for the cabin.
Prehating 15: 15 minutes
Preheating 30: 30 minutes
Timing-examples:
1-person cabin, starting temperature 21°C: 28°C in 14 minutes
2-people cabin, starting temperature 21°C: 28°C in 6 minutes
Activating the PREHEATING program
Press the program symbol
preheating 30 and enter with the program button.
Status display
The display changes automatically to the status display of the PREHEARTING program:
› Remaining time of the program
› Current temperature in the cabin
› Warning message* "DO NOT USE!"
Finishing the program PREHEATING
After reaching a temperature of 28°C or after the chosen time the program automatically switches to the normal operating mode. The cabin
is now ready for your application.
® infrared cabin have the best effect when the cabin temperature of is in the thermo-neutral zone of 28-38°C.
models equipped with the b-control deluxe.
®
and you enter the selection menu of the b-intense
Ensure that nobody is inside the cabin while preheating.
* Warning note: The cabin must not be used for application during the PREHEATING program!
Ensure that nobody is inside the cabin while preheating. The warning is also visible on the display.
The display flashes to draw attention to the warning. Failure to observe this warning may result
in overheating or combustion!
infrared programs. Choose between preheating 15 and
®
54
user program. This program is
®