Programs Selection In A 2-Person Cabin - b-intense b-control deluxe Bedienungsanleitung

EN

Programs selection in a 2-person cabin

In a 2-person cabin you can choose a different program for each seat. Thus you can enjoy the heat for two; the program is, however, tailored
to your needs.
Press the program button
assign your selected program to one or two seats. Choose the setting with the +/– buttons accordingly:
 "R/L": Program is activated on both seats
 "R": Program is activated only on the right seat
 "L": Program is activated only on the left seat
After setting the program for one seat, press the program button
seat. By pressing the program button again the choosen program will be assigned to the remaining seat.
The program selection contains
b-control deluxe
1. PREHEATING 15
2. PREHEATING 30
3. HEAT LOAD
4. VITALISATION
5. BACK
6. REGENERATION
7. SLIM
Program status display
The display shows you the current status of the chosen program and informs you
about:
› Name of the program
› Remaining time of the program
› Seat assignment for the program*
› Current intensity of the back heater in the program progress
› Current temperature in the cabin (only for b-control deluxe)
› Adjustment of intensity course of the program (–20% ... +20%, +/– = 0%)
* The note R shows the status for the right seat, the note L shows the status for the
left seat, the note R/L shows the status for both seats, if a program is assigned for
both seats. Press the program button to view the status of the other seat.
and with the symbols + and – you can choose your favourite program. Press the program button again to
b-control basic
1. HEAT LOAD
2. VITALISATION
3. BACK
4. REGENERATION
5. SLIM
and navigate via +/– to the desired program to assign it to the second
b-control single
1. HEAT LOAD
2. VITALISATION
3. BACK
4. REGENERATION
5. SLIM
Example status display for the seat "Right"
Example status display for the seat "Left"
56