General Safety Information - b-intense b-control deluxe Bedienungsanleitung

EN

General safety information

Check the required power supply. The operating voltage is announced
on the nameplate on the control and the infrared heaters.
1. The IR cabin must only be operated on an earthed shockproof socket,
which was installed and checked by a lincensed electrical company.
2. The used socket must only be operated with a fault-current circuit
breaker (FI) with a trip current of max 30mA and a circuit breaker
(safety device) of max 16A.
3. The used socket should be easily accessible after installation.
4. The IR cabin must not be operated on a multiple socket (fire hazard).
5. If used commercially, a professional annual check of the electrical
installation must be ensured by the operator.
Only original b-intense ® component parts are safe for use. The use
of not certified components can lead to damages or injuries. Waranties
and guarantees expire with the use of not certified components.
Plugging the cabin in and out is only permitted by pulling the plug,
which is connected to the cable. Don't pull the cable itself, this could
damage the cable and lead to an electric shock.
Using this device next to other devices should be avoided, for it could
lead to incorrect operation. If it is necessary, all affected devices should
be monitored, to secure regular operation.
40