b-intense b-control deluxe Bedienungsanleitung Seite 53

EN
Preheating (only with b-control deluxe)
Duration: 15 or 30 minutes, until 28°C are reached – no coloured light
Select one of the "Preheating" programs, if you want to preheat your b-intense infrared cabin. All radiators are at maximum power and
®
warm the interior of the cabin up. After the time has run out or a temperature of 28°C is reached, the program automatically switches to the
normal operating mode and you can use your cabin. You can either select a programm or set the radiators as desired individually.
Note: We recommend this program if the room temperature is too cold for you. DO NOT use the cabin during this program.
Creating an individual program via b-intense® moments app
Duration: up to 60 minutes – Light colour: freely selectable
Your program is not included? No problem, you can make your indidivudal program.
Just enter the b-intense
® moments app, click on the program button and then
on the "+" symbol in the upper right corner to create a new program. You have the
possibility to choose your own background image, a name, a light colour and define
individual intervals and their intensity
Note: In the first 5-minute interval the intensity of the back heater must not exceed
50% (the so-called warm-up phase). This helps the body to warm up comfortably and
without any stress.
The optimal choice of program depends on your personal well-being. Enjoy the user programs determined by infrared experts and increase the
effectiveness of your time in the b-intense cabin. Always remember that you should adjust the radiator as individually as possible. In case
®
you do not want to use a program, adjust the intensity as desired at any time.
53