Program Selection In A 1-Person Cabin - b-intense b-control deluxe Bedienungsanleitung

Program selection in a 1-person cabin

Press the program button
program. Confirm the desired infrared program by pressing the program button and enjoy your infrared application.
The b-intense® program selection contains
b-control deluxe
1. PREHEATING 15
2. PREHEATING 30
3. HEAT LOAD
4. VITALISATION
5. BACK
6. REGENERATION
7. SLIM
Program status display
After activating one user program as described, the display shows you the current
status of the chosen program and informs you about:
› Name of the program
› Remaining time of the program
› Current intensity of the back heater in the program progress
› Current temperature in the cabin (only for b-control deluxe)
› Adjustment of intensity course of the program (–20% ... +20%, +/– = 0%)
Ending the program
You can always end your user program. Press the On/Off button for this purpose. The program ends and the back heater is set to default
intensity.
Note b-intense
® moments App: Individually created infrared programs are not stored
on the control unit. They can only be selected via the device on which you have instal-
led the app. If you select your individually created program via tablet or mobile phone,
the name "Custom" appears on the display of the control. The remaining parameters
are shown as usual.
and enter the b-intense
® infrared program menu. With the symbols + and – you can choose your favourite
b-control basic
1. HEAT LOAD
2. VITALISATION
3. BACK
4. REGENERATION
5. SLIM
b-control single
1. HEAT LOAD
2. VITALISATION
3. BACK
4. REGENERATION
5. SLIM
Example of the program status display
Example of the status display for an user-defined
program created in the b-intense® moments App
55
EN