Making Pasta With The Automatic Program - Unold Pasta 68860 Bedienungsanleitung

MAKING PASTA WITH THE AUTOMATIC PROGRAM

Note: The short operating time is 20 minutes. After this time let the appliance cool off
completely, before continuing to make pasta. You can use the wait time to cook the
noodles you have already made or prepare them for storage.
1. Ensure that the appliance is correctly assembled and that it contains the
desired pasta die.
2. Place a sufficiently large plate under the openings of the die.
3. Measure or weigh the desired ingredients and have them on hand.
4. Open the lid of the kneading container.
5. Put flour or semolina or both as specified in the recipe into the kneading
container.
Making egg noodles
6. In the rear area make a depression in the flour. Put the full egg (egg white
and yolk) in a cup. If necessary, supplement with water or the liquid speci-
fied in the recipe, for the required quantity of liquid. Now carefully beat the
egg mass in the cup. In this process, ensure that bubbles do not occur.
7. Pour the egg mass into the depression made in the flour.
8. Close the lid.
9. Plug the mains plug into an electrical outlet. The display lights up.
10. Press the "Auto" button. The display shows "10:6 1". This runtime of
10 minutes is suitable for up to 300 g of pasta (250 g flour). After a few
seconds the program sequence starts; the time in the display counts down
to "0".
11. If you want to use the runtime of 16 minutes for pasta up to 600 g (500 g
flour) immediately press the "Auto" button again. The display shows "16:6
2". After a few seconds the program sequence starts; the time in the display
counts down to "0".
12. The kneader starts to turn and the program runs for the specified time. The
subsequent procedure is described starting from point 18.
Making noodles without egg
13. Close the lid of the appliance.
14. Plug the mains plug into an electrical outlet. The display lights up.
15. Press the "Auto" button. The display shows "10:6 1". This runtime of
10 minutes is suitable for up to 300 g of pasta (250 g flour). After a few
seconds the program sequence starts; the time in the display counts down
to "0".
16. If you want to use the runtime of 16 minutes for pasta up to 600 g (500 g
flour) immediately press the "Auto" button again. The display shows "16:6
38
Copyright UNOLD AG | www.unold.de