The accessories
how To use ...
1
2
Attaching the accessories is very simple. Push the
respective attachment on to the drive stub of the
mixer, so that the driver pin on the stub fits into
the notch of the attachment.
With centering to facilitate precise fitting of the
attachments.
To remove the attachment, simply pull it off.
Only use original ESGE-Zauberstab
caution:
switch off and unplug appliance when changing
accessories. the attachments may be sharp.
Warning:
If the attachments are loose or do not fit firmly,
readjust the spring, as described on page 39.
For safety reasons the appliance is equipped with
a press-button switch, which means that the ES-
GE-Zauberstab
works only when this switch is
®
pressed down.
Switch on the appliance by pressing down the
button only when the cutter guard is in the re-
ceptacle. Switch off the appliance by releasing
the press-button once you have finished working.
Then lift the appliance out of the receptacle. Get
rid of any pieces of food still adhering to it by tap-
ping the shaft a few times against your free hand.
liquid ingredients
To achieve a better mixture, hold the ESGE-
Zauberstab
at a slight angle in the receptacle
®
(e.g. when blending soups).
speeds
The ESGE-Zauberstab
Speed 2 is used for most applications, in particular
for chopping hard food or large quantities.
accessories.
®
offers two speeds.
®
37