Reception Of The Machine; Unpacking; Dangerous Areas - OEM MF 1 Bedienungs- Und Wartungshandbuch - Ersatzteilkatalog

MF1 - MF2 - MF3 CS OVENS FOR GASTRONOMY AND PIZZERIA

6) RECEPTION OF THE MACHINE

Upon reception of the machine make sure that the packing is
complete and not damaged.
If everything is OK, remove the package (unless different
instructions have been provided by the manufacturer).
Check if the instruction booklet is inside the packing as well as
the components specified in the transport documentation.
In case any damage or defect is found:
a- Inform immediately the transport company and your agent,
both by phone and by registered letter with return receipt;
b- Manufacturer shall also be informed.
The oven consists of three distinct parts: support, cover
Eeach part is packed, separately; on installation, the com-

7) UNPACKING

To remove the packing from the machine proceed as follows:
• Cut the straps (1) that tie up the carton.
• Open the carton (2), by removing the metallic clips.
• Remove the cardboard packaging (2).
• Check if everything is complete.
• Open the oven door, remove the refractory material fastening
carton and the loose components, as well.
• Check if the delivery is complying with the PACKING LIST.
The packing elements ( plastic bags, carton, nails, etc...)
shall be kept away from the reach of the children, since
they are potential danger sources, so, they shall be gath-
ered and sent to special centres to correctly be recycled.
Any damage or defect or non conformity with the packing
list should be immediately reported and, in any case, it
should be notified within 8 days from the date of reception
of the machine. On the contrary the goods are to be con-

8) DANGEROUS AREAS

The dangerous areas of the machine are where accidents can
occur, in the event the under mentioned instructions are not fol-
lowed.
- An access to the machine container is forbidden and very
dangerous, when it is moving.
- It is forbidden and very dangerous to repair the system,
the mechanical elements and the electric parts, when
the machine is running.
Wiring system: see enclosures.
- A machine utilization without the operator's control is forbidden.
- To near or touch the moving container with parts of the body
or any other object is forbidden and very dangerous.
- It is dangerous to operate the wall switch to disconnect or
connect the machine, in case of wet hands.
20
Downloaded from www.Manualslib.com
IMPORTANT
or hood.
ponents are assembled.
DANGER
IMPORTANT
sidered as accepted.
manuals search engine
DANGER
Do not aim high-pres-
sure jets of water at Power on.
the machine
It is forbidden and very dangerous that the user acts
as a skilled technician/ installer.
The disassembly of protections and the access to
inner parts as well as all internal maintenance pro-
cedures, repair, installation, transport and unpac-
king shall be carried out by skilled
personnel only.
ATTENTION, HOT SURFACES
Attention, danger of burns
For the user only