Environmental Conditions; Transport; Lifting Of The Packing - OEM MF 1 Bedienungs- Und Wartungshandbuch - Ersatzteilkatalog

- To the operator is suggested to attend a training course
on the use of the machine.
- In order to avoid personal risks, only suitable tools should be
used, in accordance with the local safety regulations.
- Wear safety clothing only, approved by the law in force.
- In case of works to be done in a position that cannot be
reached from the ground, use safe ladders or lifting devices
only, in conformity with the local safety regulations.
- Do not use your hands instead of suitable tools to work on the
machine.
- Do not use your hands or other tools to stop any moving parts.
- Do not use matches, lighters or flames near the machine.

4) ENVIRONMENTAL CONDITIONS

The machine shall not be exposed to less than 0° C tempera-
tures.
The machine is not suitable for exposure to explosion-risk
atmosphere.
4.1) Noise
The machine was built in order to reduce at best noise pollution
and sound pressure level.
In all those places where the presence of an operator is
expected, the detected value is less than 70 db (A).
Lifting points
Downloaded from www.Manualslib.com
MF1 - MF2 - MF3 CS OVENS FOR GASTRONOMY AND PIZZERIA
manuals search engine

5) TRANSPORT

5.1) Shipment
The machine is positioned on a wooden pallet, fastened with
screws, inside a strapped carton.
The machine can be delivered with one of the following means
of transport:
a) Land transport (lorry)
b) Air transport
c) Sea transport
d) Railway transport
The way of transport will be agreed in course of contract
between supplier and purchaser.
IMPORTANT
The packing containing the machine should be kept away
from the weather. Do not put other boxes or materials on
a)
c)

5.2) Lifting of the packing

The box should be handled with the most care. To lift and to
position the box use suitable lifting systems, according to the
weight of the machine.
The box should be lifted by using a crane or a hoist with appro-
priate belts or by means of a lift track, by inserting the forks in
the appropriate joints.
DANGER
Any handling and lifting operation should be done by
skilled personnel, authorized to use appropriate equip-
ments.
The manufacturer declines all responsibility for any dam-
age to persons or things caused by inobservance of the
current safety regulations regarding lifting and moving of
materials inside or outside the factory.
5.3) Storage
IMPORTANT
The box containing the machine should be stored away
from weather. Do not put other boxes or materials on it.
it.
b)
d)
19