Werbung
Verfügbare Sprachen
Verfügbare Sprachen
6.9. Temperature measurements
Warning!
To avoid electric shock, disconnect test leads from any source of voltage before making a temperature
measurement.
1. Set the rotary switch to TEMP position.
2. Insert the temperature adaptor into the V/-input terminal and the COM-terminal. Ensure that
the minus marking at the adaptor is inserted into the COM-terminal and the plus-marking is
inserted into the V/-input terminal.
3. Select the desired measuring unit °C or °F by pressing MODE-button.
4. Insert the K-type thermocouple into the temperature socket (T1) and / or into the input socket
(T2) making sure to observe the correct polarity.
5. Touch the temperature probe head to the part whose temperature you wish to measure. Read
the temperature in the display.
Note:
In the case of an open measuring input or exceeded the measuring range "OL" is displayed in the
display.
-40-
Werbung
