AsViva Cardio C16 Benutzerhandbuch Seite 43

ASSEMBLY
Step 4
1. Attach the left pedal (9) to the left pedal tube (11). Secure it by using two carriage bolts (44), two flat
washers (65) and two nylon locknuts (42). Repeat this for the right pedal (10).
2. Attach the stationary handlebar (18) to the back of the front support (13). Secure it by using two
allen bolts (30) and two curve washers (31).
3. Connect the middle monitor wire (60) to the upper monitor wire (83) of the monitor (19).
Note:
Make sure all the wires are put into the groove at the back of the monitor before you slide the monitor
on to the front support to avoid pinching the wires.
43