Herunterladen Inhalt Inhalt Diese Seite drucken

12-Hour Air Pressure History; Outdoor Sensor/Channel Setting; Indoor Humidity; Maximum And Minimum Values - Auriol 4-LD5210 Bedienungs- Und Sicherheitshinweise

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

12-hour air pressure history

Press the HISTORY -button 30 to view the air pressure history for the last 12 hours.
0 – HR = current air pressure
- 1 HR = air pressure 1 hour ago
-2 HR = air pressure 2 hours ago... and so on

Outdoor sensor/channel setting

You can use the weather station with up to 3 outdoor sensors at the same time. Open the battery compartment
of the outdoor sensor 38 and select a channel (1-3) by using the Channel selection switch 40. Press and hold
the CH – button 24 on the weather station for 2 seconds. The weather station will now attempt to receive the
signal from the outdoor sensor.
. Close the battery compartment.
NOTE: The outdoor sensor must be placed within a maximum distance of 100 m, without
obstacles, of the weather station.
If using more than one outdoor sensor: Press the CH – button 24 in normal time display mode to switch between
the reception channels. The rotation symbol
on the display 9 shows that the display will alternate between
the different reception channels.
Only outdoor sensors that are connected are displayed. Press and hold the CH – button 24, to remove unused
channels or to add channels.

Indoor humidity

The current indoor humidity 5
is shown on the display. The comfort symbol shows the indoor
humidity in 3 categories:
< 40 %
40 – 60 %
> 60 %
dry
comfort
wet
DRY
COMFORT
WET

Maximum and minimum values

The maximum and minimum temperature and humidity is stored as soon as the batteries are inserted.
Repeatedly and briefly press the + - button 22 to show the maximum MAX, minimum MIN and the current
indoor temperature 7, indoor humidity 5 and the outdoor temperature 9 and outdoor humidity 4 on the display.
The minimum and maximum values will be deleted automatically every night at 12 pm.

Battery level indicator

If the batteries run too low to power the weather station, the outdoor sensor and signal transmission, the battery
level indicator 6 or 8 will appear on the display. Replace the batteries in all devices as soon as
possible. Restart the weather station.

Restart (RESET)

Press RESET-button 26 to reset the radio-controlled weather station and restart radio reception.

Cleaning instructions

Improper cleaning can damage the device. Do not submerge the device in water or other liquids. Do not use
aggressive cleaners, brushes with metal or nylon bristles, or sharp or metallic cleaning tools such as knives,
scrapers or similar implements. These may damage the surface of the device. Clean the device using a soft, dry,
lint-free cloth, such as a glasses cleaning cloth.
- 61 -

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Ian 334272_1907

Inhaltsverzeichnis