Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
11.2
Assembly
1.
Undercarriage
Push in the locking pin in order to turn the
legs of the undercarriage.
2.
Attachment arms
Put the attachment arms on the desired
location on the undercarriage.
Fix the position by pressing down the
locking levers.
3. Workpiece support
Stick the workpiece support in the provided
guidance.
Fix the positon with a clamping screw.
12
OPERATION
12.1
Operation
12.1.1 Mounting of a mitre saw
The mitre saw can be fixed on the attachment arms by using the provided screws.
12.1.2 Workpiece support
The workpiece supports can be used as additional support while cutting long workpieces.
In case the length and weight of the workpiece dangers the stability, the workpiece has to be
supported additionally.
The workpiece supports can also be used as angle stops.
ZIPPER MASCHINEN GmbH
www.Zipper-Maschinen.at
KAPPSÄGENSTÄNDER / MITRE SAW STAND ZI-KSS1650
OPERATION
15
Werbung
Inhaltsverzeichnis
