Assembly; Pre-Commissioning Work; Assembly And Description - Zipper ZI-PTKS85 Betriebsanleitung

12

ASSEMBLY

Please check the product contents immediately after receipt for any eventual transport damage or
missing parts. Claims from transport damage or missing parts must be placed immediately after initial
machine receipt and unpacking before putting the machine into operation. Please understand that later
claims cannot be accepted anymore.
12.1

Pre-commissioning work

The machine is supplied with a transport protection.
Before first use remove this is as follows
Open the cleanout door on the left side of
the machine and remove the whole packing
foam
12.2

Assembly and description

Mount the fence rail on the ripe fence.
Use the screws shown on the picture
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
ZI-PTKS85
W A R N I N G
ASSEMBLY
23