Safety; Intended Use; Prohibited Use; Security Instructions - Zipper ZI-KSS1650 Betriebsanleitung

10

SAFETY

10.1

Intended Use

The machine must only be used for its intended purpose! Any other use is deemed to be a case of
misuse.
To use the machine properly you must also observe and follow all safety regulations, the assembly
instructions, operating and maintenance instructions lay down in this manual.
All people who use and service the machine have to be acquainted with this manual and must be
informed about the machine's potential hazards.
It is also imperative to observe the accident prevention regulations in force in your area.
The same applies for the general rules of occupational health and safety.
The machine is used for:
 Fixing of machines like mitre saws for woodworking
Any manipulation of the machine or its parts is a misuse. In this case ZIPPER-MASCHINEN
and its sales partners cannot be made liable for ANY direct or indirect damage.
Even when the machine is used as prescribed it is still impossible to eliminate certain residual risk
factors.
Ambient conditions
The machine may be operated:
humidity
temperature
The machine shall not be operated in areas exposed to increased fire or explosion hazard.
10.2

Prohibited use

 The operation of the machine outside the stated technical limits described in this manual is
forbidden.
 The use of the machine not according with the required dimensions is forbidden.
 The use of tools not being suitable for the machine and not being certified is forbidden.
 Any manipulation of the machine and parts is forbidden.
 The use of the machine for any purposes other than described in this user-manual is forbidden.
 The unattended operation on the machine during the working process is forbidden!
10.3

Security instructions

Missing or non-readable security stickers have to be replaced immediately!
The locally applicable laws and regulations may specify the minimum age of the operator
and limit the use of this machine!
To avoid malfunction, machine defects and injuries, read the following security instructions!
 Read the manual carefully and get familiar with all components before operating the machine
for the first time.
 This manual contains important information for correct operation of the machine.
 This manual is part of the machine and shall be stored for later reference. Add this manual to
the machine if handed to 3rd persons for use.
 Stick to these Security Warnings and Instructions to reduce the risk of serious injuries.
 Assure that the working area is sufficiently lighted!
 Keep your work area dry and tidy! An untidy work area may cause accidents. Avoid slippery
floor.
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
KAPPSÄGENSTÄNDER / MITRE SAW STAND ZI-KSS1650
 The maximum permissible weight load of 150 kg must never
be exceeded.
HIGHEST RISK OF INJURY!
HIGH ES T RIS K OF INJU RY!
W A R N I N G
max. 70%
+5°С to +40°С (+41°F to +104°F)
SAFETY
13