EINHELL TVB 900x720 Aufbauanleitung / Betriebsanleitung Seite 6

Anleitung TVB 900x720
GB
5
Fit the two support brackets (11) and then the
two tubular supports (2) as shown above.
7
You can now fit the hinges as shown above.
After the sections are aligned with the machine
they can be tightened. Make sure that the hinge
sections are flat against the table sections.
6
09.11.2001 11:44 Uhr Seite 6
6
The latches (12) for the tubular supports (2) are
to be fitted in advance in the 3rd slot of the table
sections (1) using the M8x10 oval head screws
(15) and square nuts (16) as shown above.
8
After fitting the table to the machine, align it
parallel to the machine table using the two
latches (12).
After adjusting, tighten all screws and leave the
table folded up.