Cleaning And Maintenance - Beko HNU51311SH Anleitung

4

Cleaning and Maintenance

DANGER!
Risk of burning, risk of
electric shock!
Wait for the appliance to cool
down before cleaning or mainte-
nance works. Shut down the fuse
or unplug the appliance.
Risk of damage occurs due to the
humidity intrusion into the elect-
ronics. Never clean the controllers
A
with a wet cloth.
Surface may be damaged due to
improper cleaning. Clean the sta-
inless steel surfaces only in the
direction of brushing. Do not use
stainless steel cleaner for control-
lers.
The surface may be damaged due
to abrasive or rubbing cleaning
agents. Never use abrasive or rub-
bing cleaning agents.
14 / EN
CAUTION
Risk of damage due to the corro-
sion damage. Always operate the
appliance while cooking in order
to prevent condensate formation.
Condensate may cause corrosion
damage. Replace immediately the
faulty lamps in order to prevent ot-
her lamps from being overloaded.
The risk of damage occurs due
to the humidity intrusion to the
electronics. Never clean the cont-
A
rollers with a wet cloth. Surface
may be damaged due to improper
cleaning. Clean the stainless ste-
el surfaces only in the direction
of brushing. Do not use stainless
steel cleaner for controllers. The
surface may be damaged due
to abrasive or rubbing cleaning
agents. Never use abrasive or rub-
bing cleaning agents. There is the
risk of damage due to backflow
of condensate. Install the air out-
let duct with a slope of 1°, slightly
downwards the appliance.
CAUTION
A
You can use this appliance in was-
te air mode and in air circulation
mode.
Waste air mode
Absorbed air is cleaned by oil filters
and expelled by means of a piping
system. (Pic. 3) If you want to trans-
A
fer the waste air to a disabled smoke
or waste gas flue, you have to obta-
in permission from an authorised
flue cleaning specialist. If the waste
air is expelled over the external wall,
a telescopic wall frame should be
used.
Hood / User Manual