Beko HNU51311SH Anleitung Seite 11

3 Installation and Use of the Appliance
3.1 Position of the Appliance
• Attention should be paid to the distance bet-
ween the hob and hood before installation. This
distance should be 65 cm.
• The measure must be taken from the grill sur-
face on gas hobs and from the glass surface on
electric hobs.
Your new appliance is especially
energy efficient. You will find here
C
some advises on how to save more
energy while using the appliance,
and required to destroy the applian-
ce in a proper way.
3.2 Things to do for energy saving;
• Ensure sufficient air intake to make the hood
operate efficiently and with low operation noise
during cooking.
• Set the fan level according to the density of
steam in kitchen. Use the high level only when
needed. A lower fan level means less energy
consumption.
• If dense smoke is expected in the kitchen, select
a higher level of fan in advance. It is required to
operate the hood much longer to remove the
smoke already spread all over kitchen.
• Turn off the hood when not in use.
• Clean or replace the filter at intervals stated,
Hood / User Manual
thus, the efficiency of the ventilation is increa-
sed and the risk of fire is eliminated.
3.3 Installation of the Appliance
CAUTION
A
Use protective gloves and glasses
while performing drilling and cut-
ting operations.
A
C
ELECTRO
650 mm
ELEKTRİKLİ
Pic. 6
3.4 Drilling Mounting Holes
• Adhere the installation template provided with
the appliance onto the surface on which the ins-
tallation will be carried out.
• Drill the holes indicated on the installation draft
with A, B, C, D using a Ø4 mm drill bit. Pic. 6
Pic. 7
• Cut the lower surface of the cabinet where the
hood will be installed in the dimensions speci-
530
K1 B
386±1
A,B,C,D = Ø3
D
GAS
650 mm
GAZLI
WORKTOP
TEZGAH
H670.1170.05.01
11 / EN