sportplus S-BIKE Bedienungsanleitung Seite 16

14
9
8
3
13
STEP 4:
• Fasten the saddle (14) to the seat pillar (3) using 3 nut (8) and washer (9) and then
insert it into the frame (1). Position the holes above one another and then fasten the
saddle to the pillar using the set screw (13).
• The set screw (13) can be used to set the correct seat height.
30
30
29
26
28
25
27
24
23
22
21
20
STEP 5:
• Slide the lower backrest mount (24) onto the seat pillar (3). Secure the connection
with 2 sets of carriage bolts (23), washers (25) and locking nuts (26). Attach the
backrest (30) to the backrest mount (27). Secure the connection with 4 sets of
screws (28) and spring washers (29).
• Attach the rear handle (22) to the lower backrest mount (24) and secure the
connection with 2 sets of screws (20) and curved washers (21).
3
31