Figure 3-5 Sample Hi Precision Sensor Label; Sensor Selection - Siemens SITRANS FST020 IP65 NEMA 4X Betriebsanleitung

①
Figure 3-5

Sensor Selection

The following is a typical sensor selection procedure.
Note
The transmitter must be powered up before you can select a sensor model. Refer to
Connecting (Page 11).
1. Press the <Down Arrow> key to select [Install Sensor].
2. Press <Right Arrow> key to [Sensor Model]. Press <Right Arrow> key and scroll to select
FST020 IP65 NEMA 4X Quick Start
Operating Instructions, 08/2014, A5E03086489-AJ
Hi Precision sensor model number
Sensor size
Sample Hi Precision Sensor Label
the sensor model found on the sensor label.
Connecting
3.2 Programming the Transmitter
25