Siemens SITRANS FST020 IP65 NEMA 4X Betriebsanleitung Seite 21

5. Press <Left Arrow> key and return to [Channel Setup]. Press <Down Arrow> key to select
Save/Rename Site procedure
Whenever new site configurations are added to an existing site that site must be saved again
to retain the new site changes.
1. To save all programmed data to site, press <Left Arrow> key and then scroll up to
2. Press <Right Arrow> key and scroll to [Save/Rename Site].
3. Press <Right Arrow> key and then <ENTER> to save all programmed data to site.
4. To return to the top menu level, continue to press the <Left Arrow> key.
Select Pipe Class
1. Press <Right Arrow> key to select [Pick Pipe Class].
2. Press <Right Arrow> key again. Press the <Up/Down Arrow> keys to scroll to desired
FST020 IP65 NEMA 4X Quick Start
Operating Instructions, 08/2014, A5E03086489-AJ
①
Site name filed is initially blank
②
(?) indicates cell is ready to accept data. Cursor shown in first character position.
Note
To set English or Metric units: In [Meter Type] menu, scroll to [Meter Facilities] menu.
Press <Right Arrow> and select desired units. Press <ENTER> to select. Press <Left
Arrow> and <Up Arrow> keys to return to [Meter Type] menu.
Note
To select alphanumeric characters: Press <Right Arrow> key to cursor and then press
<Up/Down Arrow> keys to select letters and numbers.
[Pipe Data].
Note
After the site configuration procedures that follow are complete the newly created site
must be saved again to retain the new site data. Refer to the Save/Rename Site
procedure below.
[Channel Setup].
Pipe Class.
Connecting
3.2 Programming the Transmitter
19