Positioning And Levelling - Electrolux WA 1457 F Benutzerinformation

6. Put one of the polystyrene packaging
elements on the floor behind the appli-
ance. Carefully put down the appliance
with the rear side on it. Make sure not
to damage the hoses.
7. Remove the polystyrene protection
from the bottom.
8. Pull up the appliance in vertical posi-
tion.
9. Remove the power supply cable and
the drain hose from the hose holders.
10. Remove the three bolts. Use the key
supplied with the appliance.
Downloaded from www.Manualslib.com
1
manuals search engine
11. Pull out the plastic spacers.
12. Put the plastic caps in the holes. You
can find these caps in the user manual
bag.
2
Warning! Remove all the packaging
and the transit bolts before you install
the appliance.
We recommend that you keep the
packaging and the transit bolts for
when you move the appliance.

POSITIONING AND LEVELLING

• Install the appliance on a flat hard floor.
• Make sure that carpets do not stop the
air circulation below the appliance.
• Make sure that the appliance does not
touch the wall or other units
• Loosen or tighten the feet to adjust the
level. A correct adjustment of the appli-
ance level prevents the vibration, noise
electrolux 21