Positioning And Levelling - Electrolux WAGL6S200 Benutzerhandbuch

22 electrolux
7. Remove the polystyrene protection
from the bottom.
8. Pull up the appliance in vertical posi-
tion.
9. Remove the power supply cable and
the drain hose from the hose holders.
10. Remove the three bolts. Use the key
supplied with the appliance.
11. Pull out the plastic spacers.
1
2
12. Put the plastic caps in the holes. You
can find these caps in the user manual
bag.
– We recommend that you keep the
packaging and the transit bolts for
when you move the appliance.
– If the appliance is delivered in the
winter months when there are minus
temperatures. Store it at room tem-
perature for 24 hours before using
for the first time.

POSITIONING AND LEVELLING

• Install the appliance on a flat hard floor.
• Make sure that carpets do not stop the
air circulation below the appliance.
• Make sure that the appliance does not
touch the wall or other units
• Loosen or tighten the feet to adjust the
level. A correct adjustment of the appli-
ance level prevents the vibration, noise
and the movement of the appliance when
in operation.