Microwave Functions - Atag CX16611B Handbuch

OPERATION

Microwave functions

Warning!
• Microwave heating of liquids (such as water) can result in delayed
eruptive boiling. This means that liquid starts boiling without you
seeing any movement. Once removed from the oven, the liquid
can start to boil rapidly and spatter out of the cup with the risk of
injury. The effect of eruptive boiling can be eliminated by placing a
plastic / glass spoon in the fluid before cooking it in the microwave
oven.
• Take care with baby food and jars:
▷ The contents of feeding bottles and baby food jars must be
stirred or shaken
after heating.
▷ Carefully check the temperature of the contents before
consumption, in order to avoid burns.
• Utensils can be hot after use in the microwave oven!
1. Place the dish on the oven rack.
2. When the oven is in standby mode touch the microwave key to
activate the microwave function.
▷ '01:00' flashes in the display. '800' and the microwave function
icon are visible.
3. Touch the clock / temperature setting key.
4. Use the selection dial knob to set the cooking time.
5. Touch the microwave key.
▷ The power indication will flash in the display.
▷ You will hear an audible signal.
6. Use the selection dial knob to set the power level.
7. Touch the start / pause key to start the cooking process.
▷ When the cooking process is complete, a signal sounds.
▷ 'End' appears in the display.
▷ The ventilator will continue to run for a while before switching
itself off.
The combi microwave oven goes to standby automatically after
5 minutes if you do not touch the start/pause key.
EN 15