Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Picture settings
After first installation or after resetting to the ex-factory settings the values in the menu <Picture> are set to the defaults. You can
individually change these values as described below, depending on your personal preference, the location of the device and
the light incidence associated with the location.
For AV sources (TV (optional), SCART1, SCART2, YUV, S-Video, CVBS, HDMI)
20
Downloaded from
www.Manualslib.com
manuals search engine
S
Press the [MENU] button to open the main menu.
S
With the button [
] or [
] select the <Picture>
A
"
menu.
Contrast
S
Select <Contrast> [
] / [
].
Y
B
S
Press the button [
], the contrast is increased.
"
S
Press the button [
], the contrast is reduced.
A
Brightness
S
Select <Brightness> [
] / [
Y
B
S
Press button [
], the picture becomes brighter.
"
S
Press button [
], the picture becomes darker.
A
Sharpness
S
Select <Sharpness> [
] / [
Y
B
S
Press button [
], the picture becomes sharper.
"
S
Press button [
], the picture becomes softer.
A
Color
S
Select <Color> [
] / [
].
Y
B
S
Press button [
] and the colour saturation is in-
"
creased.
S
Press the button [
] and the colour saturation is
A
reduced.
Tint
Colour setting - for NTSC only!
S
Select <Tint> [
] / [
]. You can adjust the tint with
Y
B
the button [
] or [
].
A
"
Color Balance
S
Select <Colour balance> [
] / [
Y
You can select one of four possibilities:
normal, cold warm and User [
A
User : RED Gain, GREEN Gain and BLUE Gain
Setting range 0 - 127
Picture adjust
S
Select <Picture adjust> [
] / [
Y
You can select one of four possibilities:
normal, light, dark and Auto [
] / [
A
DNC (Dynamic Noise Control)
Not for HDMI!
Weak TV signals or poor video signals can generate
disturbing picture noise. DNC dynamically adapts the
effect of the digital noise suppression to the picture
content.
S
Select <DNC> [
] / [
].
Y
B
S
Select a value between 0 and 10 [
Backlight value
If the option <Backlight ALC> is switch off, you can
adjust the backlight brightness in 4 steps.
If the option <Backlight ALC> is switch on, the adjusted
value is the max. possible backlight brightness.
].
].
].
B
] / [
].
"
].
B
].
"
] / [
].
A
"
ENGLISH
Werbung
Kapitel
Inhaltsverzeichnis
Fehlerbehebung
