Matrix Mode - For The Configuration Of Video Walls - JVC CO-46LCD-BD Bedienhandbuch

Matrix Mode - for the Configuration of Video Walls

Matrix mode can be used without limitation with progressive signals. In the case of interlaced signals the matrix size is limited
to a maximum of 3x3 and a fixed overscan setting of 5 %. This function is not usable with HDMI interlaced signals.
ENGLISH
Downloaded from www.Manualslib.com
Example: display matrix 2x2
Example: display matrix 2x2
Sides of the enlargement of the picture section
manuals search engine
S Press the button [MENU] to display the main menu
on screen.
S With the button [ ] or [ ] select the menu <Setup>.
A "
S With the button [ ] or [ ] now select the menu <Ma-
Y B
trix Mode> and press the button [
menu <Matrix Mode>.
S With the button [ ] or [ ] select the menu option
Y B
<Matrix Mode>.
S With the button [ ] or [ ] you can set the desired
A "
matrix size.
The following matrix sizes are selectable: 2x2, 2x3,
3x2, 3x3, 3x4, 4x3 or 4x4.
S
With the button [ ] or [ ] select the menu option
Y B
<Display position in matrix>.
S With the button [ ] or [ ] you can set the display po-
A "
sition within the matrix.
The possible display positions result from the pre-
viously set matrix size.
S
With the button [ ] or [ ] select the menu option
Y B
<Overscan percentage>.
S With the button [ ] or [ ] you can set the overscan
A "
between 0 and 10 %.
The overscan facility enlarges the picture section
by the preset value for the display sides that are in
contact with each other.
] to open the
"
29