Operator Control; Switching On / Off; Channel Change (Optional With Tuner); Volume And Sound Settings (Only With Integrated Loudspeaker) - JVC CO-46LCD-BD Bedienhandbuch

Operator control

Switching on / off

Indication on operation (Power On) (blue)
Indication when on standby (orange)

Channel change (optional with tuner)

Volume and sound settings (only with integrated loudspeaker)

12
Downloaded from www.Manualslib.com
IR sensor for
remote control
Channel information
manuals search engine
The device is switched on.
Please note the mains switch must be in position "I"
(see page 10 below).
The indicator Power On lights up blue on the device.
If a signal is pending at any input, the device is
switched automatically to standby mode after a waiting
period.
The indicator Power On lights up orange on the device.
If a signal is available at any input, the device is
switched on automatically.
S To switch off the device you must set the mains
switch in position "0"
S Select TV mode by pressing the [TV] button on the
remote control.
With the buttons [P ] / [P ] on the remote control:
Y B
S Press the button [P ] to increase the channel num-
Y
ber.
S
Press the button [P ] to reduce the channel
B
number.
With the buttons [0...9] on the remote control:
Select the channel number directly by pressing the
buttons [0...9].
With the channel overview in the OSD menu:
S Press the button [LIST] on the remote control to dis-
play the channel overview on the display.
S Select a channel with the buttons [
the remote control.
S
Press the red button to close the channel overview.
With the buttons [VOL ] / [
" A
control:
S Press the button [VOL ] to increase the volume.
"
S Press the button [ VOL] to reduce the volume.
A
] on
BY " A
VOL] on the remote
ENGLISH