5. Specifications
General
Measurement of DVB-S / -S2 / -T / -T2 / -C / -C2 / Analogue TV
2.7 inch (6.9 cm) LCD colour display (400 x 360 pixels)
Optical and acoustic signal display
Rechargeable battery: Li-Ion (7.4 V / 1400 mA/h) up to 3 hours of operation
Quick charge of the battery in approx. 3 hours
Long standby time and low power consumption
Easy editing of basic settings
Mini-USB connection for firmware updates
Power supply: AC 100-240 V / DC 12 V, 1 A
DVB-S / S2
LNB short-circuit protection and short-circuit indication
Real-time spectrum analysis
Satellite and transponder identification
All DiSEqC protocol monitors are based on 22 KHz signal
Angle calculation of azimuth and elevation
Graphical satellite alignment display
Displays: PWR, CNR (MER), CBER, VBER, LBER,
Feed CUR, Feed VOL, Frequency offset
DiSEqC 1.0 / 1.1 / 1.2 / USALS
Auto DiSEqC detection for DiSEqC 1.0
Unicable I & II (EN 50494 / EN 50607)
DiSEqC measurement and control of switching commands
Measurement of switching voltage and 22 KHz commands
Coaxial cable detection for Quattro LNB
Frequency range: 950 MHz ~ 2150 MHz
Demodulation DVB-S: QPSK
Demodulation DVB-S2: QPSK, 8QPSK
Code Rate DVB-S: 1/2, 2/3, 3/4, 5/6, 7/8, Auto
Code Rate DVB-S2: 2/5, 1/2, 3/5, 2/3, 3/4, 5/6, 8/9, 9/10, Auto
Symbol rate: 1M sym/s to 45 Msym/s
Input impedance: 75 Ω
Input level: 35 ~ 100 dBµV
LNB polarisation, voltage: Vertical 13 V, Horizontal 18 V, 400 mA
Bandwidth: C/Ku band selectable
Note:
Weight and dimensions are not the absolute exact values. Technical details may be
changed at any time and without prior notice.
ENGLISH
31