Megasat HD 4 Combo V2 Bedienungsanleitung Seite 42

4. Main menu
4.1.1 Measurement
1
2
3
6
8
10
13
1. Satellit
2. Transponder
3. Smiley symbol
4. LNB voltage
5. LNB power
6. PWR
7. CBER
8. CNR
9. VBER
10. Link Margin
11. Frequency offset
12. STR / QTY
13. F-keys
14. LNB settings
08
Shows the current satellite. Use the t u buttons to change
the satellite. Press OK to move to the satellite list. Use the
pq buttons to select the desired one and press OK to confirm.
Shows the current transponder. Use the t u buttons to
change the transponder. Press OK to enter a transponder
manually (use the pq buttons to change the value).
Confirm with OK.
Indicates whether the set satellite has been found.
Shows the current LNB voltage
(18 V = horizontal / 13 V = vertical)
Shows the current LNB power consumption
Indicates the current level of the signal in dBµV.
Indicates the current CBER value of the signal.
Indicates the current CNR value of the signal.
Indicates the current VBER value of the signal.
Shows the difference between the minimum expected
power and the sensitivity of the receiver.
Displays the current frequency offset.
Indicates the current signal strength (STR) and the current
signal quality (QTY) of the signal.
Various function keys for further actions.
To change the respective LNB or Unicable settings.
ENGLISH
4
14
5
7
9
11
12