Megasat HD 4 Combo V2 Bedienungsanleitung Seite 57

4. Main menu
4.2.5 Multi channel
This display shows the level (dµBV) of 6
channels simultaneously. Use the t u
buttons to select a channel, press OK to
add another channel to the list.
Note:
You can change the preset channels.
However, these are reset to the pre-
set values after leaving the menu.
4.2.6 Antenna Power
In this menu item you can set the power
supply of the antenna.
Depending on the type of DVB-T anten-
na you are using, you must set the power
supply here.
If you are using an active DVB-T antenna
with its own power supply, select „0 V". If
you are using an antenna without its own
power supply, select 5 V, 12 V, 18 V or 24
V depending on the antenna so that it is
supplied with power.
ENGLISH
23