Spectrum Analysis - Megasat HD 4 Combo V2 Bedienungsanleitung

4. Main menu

4.1.4 Spectrum analysis

1
2
3
4
1. Shows the current frequency and the signal strength in dBµV.
2. Shows the range of the power level (0~100 dBµV).
Use thet u buttons to search for the desired frequency and display the corres-
3.
ponding value.
Use the pq buttons to navigate to the horizontal line. If selected, the first yellow
4.
bar will be marked RED. Now set the start frequency of the spectrum with the
t u buttons. Repeat the procedure with the other yellow bar to set the final
frequency.
Press the F1 key to access the LNB settings.
5.
The F2 key takes you to the satellite identification.
6.
Press the F3 key to switch between 13V and 18V.
7.
The F4 key toggles between 9750 MHz (22K) and 10600 MHz.
8.
14
ENGLISH